Translock DL95 Bush
DL95 30 X 60mm Drivelock Bush
Variation Not Available
DL95/30
In Stock
£
24.19
Inc VAT
£
20.15
Ex VAT
DL95 30 X 60mm Drivelock Bush | DL95/30
Add to List
Remove from List
Add to Cart
SPECIFICATION
FURTHER INFO
DRIVELOCK® 95 Bushes
- For connection of coaxial shafts
- Medium torques 200 to 4280 Nm
- Bores 17 to 80mm
- Imperial bore also available**
| Machining data | |||
|---|---|---|---|
| Recommended shaft & hub tolerances for full torque transmission are: | |||
| Shafts | H8 | Hub | H8 |
| Stock no. | d (mm) | D (mm) | B (mm) | L (mm) | M (screws) | Ts (Nm) | T (Nm) | F (kN) |
|---|---|---|---|---|---|---|---|---|
| DL95/ 17 | 17* | 50 | 50 | 56 | M6 | 17 | 200 | 24 |
| DL95/ 18 | 18 | 50 | 50 | 56 | M6 | 17 | 220 | 24 |
| DL95/ 19 | 19 | 50 | 50 | 56 | M6 | 17 | 230 | 24 |
| DL95/ 20 | 20 | 50 | 50 | 56 | M6 | 17 | 240 | 24 |
| DL95/ 24 | 24 | 55 | 60 | 66 | M6 | 17 | 290 | 24 |
| DL95/ 25 | 25 | 55 | 60 | 66 | M6 | 17 | 450 | 36 |
| DL95/ 28 | 28 | 60 | 60 | 66 | M6 | 17 | 510 | 36 |
| DL95/ 30 | 30 | 60 | 60 | 66 | M6 | 17 | 550 | 36 |
| DL95/ 32 | 32 | 63 | 60 | 66 | M6 | 17 | 580 | 36 |
| DL95/ 35 | 35 | 75 | 75 | 83 | M8 | 41 | 760 | 45 |
| DL95/ 38 | 38 | 75 | 75 | 83 | M8 | 41 | 850 | 45 |
| DL95/ 40 | 40 | 75 | 75 | 83 | M8 | 41 | 900 | 45 |
| DL95/ 42 | 42 | 78 | 75 | 83 | M8 | 41 | 930 | 45 |
| DL95/ 45 | 45 | 85 | 85 | 93 | M8 | 41 | 1520 | 67 |
| DL95/ 48 | 48 | 90 | 85 | 93 | M8 | 41 | 1600 | 67 |
| DL95/ 50 | 50 | 90 | 85 | 93 | M8 | 41 | 1690 | 67 |
| DL95/ 55 | 55 | 94 | 85 | 93 | M8 | 41 | 2430 | 90 |
| DL95/ 60 | 60 | 100 | 85 | 93 | M8 | 41 | 2680 | 90 |
| DL95/ 65 | 65 | 105 | 85 | 93 | M8 | 41 | 2930 | 90 |
| DL95/ 70 | 70 | 115 | 100 | 110 | M10 | 83 | 3720 | 107 |
| DL95/ 75 | 75* | 125 | 100 | 110 | M10 | 83 | 3970 | 107 |
| DL95/ 80 | 80* | 125 | 100 | 110 | M10 | 83 | 4280 | 107 |