Translock DL80 Bush
DL80 18 X 26mm Stainless Steel Drivelock Bush
Variation Not Available
DL80/18SS
For availability
Call +44 (0)1202 644 805
Call +44 (0)1202 644 805
£
70.95
Inc VAT
£
59.13
Ex VAT
DL80 18 X 26mm Stainless Steel Drivelock Bush | DL80/18SS
Add to List
Remove from List
Add to Cart
SPECIFICATION
FURTHER INFO
DRIVELOCK® 80 Bushes in Stainless Steel
- Stainless Steel (303 / 304)
- Self-centering for thin walled hubs
- Low torques 22 to 910 Nm
- Bores 10 to 50mm
- Imperial bore also available*
| Machining data | |||
|---|---|---|---|
| Recommended shaft & hub tolerances for full torque transmission are: | |||
| Shafts | H8 | Hub | H8 |
| Stock no. | d (mm) | D (mm) | D1 (mm) | A (mm) | B (mm) | L (mm) | M (screws) | Ts (Nm) | T( Nm) | F (kN) | p (N/mm2) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DL80/ 10SS | 10 | 16 | 29 | 14 | 27 | 31 | M4 | 2 | 22 | 4 | 51 |
| DL80/ 12SS | 12 | 18 | 32 | 14 | 28 | 32 | M4 | 2 | 26 | 4 | 46 |
| DL80/ 14SS | 14 | 23 | 38 | 14 | 28 | 32 | M4 | 2 | 30 | 4 | 36 |
| DL80/ 15SS | 15 | 24 | 44 | 16 | 37 | 43 | M6 | 8 | 73 | 10 | 67 |
| DL80/ 16SS | 16 | 24 | 44 | 16 | 37 | 43 | M6 | 8 | 78 | 10 | 67 |
| DL80/ 18SS | 18 | 26 | 47 | 18 | 39 | 45 | M6 | 8 | 87 | 10 | 55 |
| DL80/ 19SS | 19 | 27 | 49 | 18 | 39 | 45 | M6 | 8 | 92 | 10 | 53 |
| DL80/ 20SS | 20 | 28 | 50 | 18 | 39 | 45 | M6 | 8 | 97 | 10 | 51 |
| DL80/ 22SS | 22 | 32 | 54 | 25 | 46 | 52 | M6 | 8 | 105 | 10 | 32 |
| DL80/ 24SS | 24 | 34 | 56 | 25 | 46 | 52 | M6 | 8 | 175 | 15 | 45 |
| DL80/ 25SS | 25 | 34 | 56 | 25 | 46 | 52 | M6 | 8 | 180 | 15 | 45 |
| DL80/ 28SS | 28 | 39 | 61 | 25 | 46 | 52 | M6 | 8 | 200 | 15 | 40 |
| DL80/ 30SS | 30 | 41 | 62 | 25 | 46 | 52 | M6 | 8 | 220 | 15 | 38 |
| DL80/ 32SS | 32 | 43 | 65 | 25 | 46 | 52 | M6 | 8 | 310 | 19 | 48 |
| DL80/ 35SS | 35 | 47 | 66 | 32 | 53 | 59 | M6 | 8 | 340 | 19 | 34 |
| DL80/ 38SS | 38 | 50 | 72 | 32 | 53 | 59 | M6 | 8 | 370 | 19 | 32 |
| DL80/ 40SS | 40 | 53 | 75 | 32 | 53 | 59 | M6 | 8 | 390 | 19 | 30 |
| DL80/ 42SS | 42 | 55 | 78 | 32 | 53 | 59 | M6 | 8 | 410 | 19 | 29 |
| DL80/ 45SS | 45 | 59 | 86 | 45 | 70 | 78 | M8 | 18 | 820 | 36 | 36 |
| DL80/ 48SS | 48 | 62 | 87 | 45 | 70 | 78 | M8 | 18 | 880 | 36 | 35 |
| DL80/ 50SS | 50 | 65 | 92 | 45 | 70 | 78 | M8 | 18 | 910 | 36 | 33 |