Site encryption and secure transactions
We accept PayPal, Mastercard, Visa and more
To mainland UK on orders of £100+
Site encryption and secure transactions
We accept PayPal, Mastercard, Visa and more
To mainland UK on orders of £100+
| Machining data | |||
|---|---|---|---|
| Recommended shaft & hub tolerances for full torque transmission are: |
|||
| Shafts | H8 | Hub | H8 |
| Stock no. | d (h8) (mm) | D (mm) | L1 (mm) | L (mm) | M (screws) | Ts Nm | T Nm | F kN | p N/mm2 |
|---|---|---|---|---|---|---|---|---|---|
| DL61/ 5 | 5 | 16 | 11 | 13.5 | M2.5 | 1.2 | 5 | 2 | 55 |
| DL61/ 6 | 6 | 16 | 11 | 13.5 | M2.5 | 1.2 | 6 | 2 | 55 |
| DL61/ 6.35 | 6.35 | 16 | 11 | 13.5 | M2.5 | 1.2 | 6 | 2 | 55 |
| DL61/ 7 | 7 | 17 | 11 | 13.5 | M2.5 | 1.2 | 8 | 2 | 55 |
| DL61/ 8 | 8 | 18 | 11 | 13.5 | M2.5 | 1.2 | 10 | 2.5 | 50 |
| DL61/ 9 | 9 | 20 | 13 | 15.5 | M2.5 | 1.2 | 15 | 3 | 55 |
| DL61/ 9.53 | 9.53 | 20 | 13 | 15.5 | M2.5 | 1.2 | 15 | 3 | 55 |
| DL61/ 10 | 10 | 20 | 13 | 15.5 | M2.5 | 1.2 | 15 | 3 | 55 |
| DL61/ 11 | 11 | 22 | 13 | 15.5 | M2.5 | 1.2 | 18 | 3 | 50 |
| DL61/ 12 | 12 | 22 | 13 | 15.5 | M2.5 | 1.2 | 20 | 3 | 50 |
| DL61/ 14 | 14 | 26 | 17 | 20 | M3 | 2.1 | 35 | 5 | 55 |
| DL61/ 15 | 15 | 28 | 17 | 20 | M3 | 2.1 | 40 | 5 | 50 |
| DL61/ 16 | 16 | 32 | 17 | 21 | M4 | 4.9 | 70 | 8 | 65 |
| DL61/ 17 | 17 | 35 | 21 | 25 | M4 | 4.9 | 75 | 8 | 60 |
| DL61/ 18 | 18 | 35 | 21 | 25 | M4 | 4.9 | 80 | 8 | 60 |
| DL61/ 19 | 19 | 35 | 21 | 25 | M4 | 4.9 | 85 | 8 | 60 |
| DL61/ 20 | 20 | 38 | 21 | 26 | M5 | 9.7 | 150 | 15 | 75 |
| DL61/ 22 | 22 | 40 | 21 | 26 | M5 | 9.7 | 160 | 14 | 70 |
| DL61/ 24 | 24 | 47 | 26 | 32 | M6 | 16.5 | 250 | 20 | 75 |
| DL61/ 25 | 25 | 47 | 26 | 32 | M6 | 16.5 | 260 | 20 | 75 |
| DL61/ 25.4 | 25.4 | 47 | 26 | 32 | M6 | 16.5 | 304 | 22 | 78 |
| DL61/ 28 | 28 | 50 | 26 | 32 | M6 | 16.5 | 440 | 30 | 100 |
| DL61/ 30 | 30 | 55 | 26 | 32 | M6 | 16.5 | 470 | 30 | 95 |
| DL61/ 32 | 32 | 55 | 26 | 32 | M6 | 16.5 | 500 | 30 | 95 |
| DL61/ 35 | 35 | 60 | 31 | 37 | M6 | 16.5 | 730 | 40 | 95 |
| DL61/ 38 | 38 | 65 | 31 | 37 | M6 | 16.5 | 800 | 40 | 90 |
| DL61/ 40 | 40 | 65 | 31 | 37 | M6 | 16.5 | 840 | 40 | 90 |
| DL61/ 45 | 45 | 75 | 36 | 44 | M8 | 40 | 1300 | 55 | 90 |
| DL61/ 50 | 50 | 80 | 36 | 44 | M8 | 40 | 1900 | 75 | 115 |