Mitre Gears White Plastic
24 DP Nylon Mitre Gear, 1:1 Ratio, 24 Teeth
Variation Not Available
GRPBMDP24/24
In Stock
£
34.84
Inc VAT
£
29.03
Ex VAT
24 DP Nylon Mitre Gear, 1:1 Ratio, 24 Teeth | GRPBMDP24/24
Add to List
Remove from List
Add to Cart
SPECIFICATION
FURTHER INFO
- Intermediate sizes and special mitres to drawing (tooling charges may apply)
- Standard tolerances, unless otherwise stated ±0.010 in
- Shaft axis to intersect within ±0.001″
- Angular accuracy between shafts ±5mins
- Mounting distance tolerance ±0.002″
- Bore tolerance as below
- 20° pressure angle
- Supplied in pairs
- All dimensions in inches
- 1:1 Ratio
| Imperial Moulded Mitre Gear Sets 48, 32, 24 & 16 DP in Nylon/Acetal | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Code | DP | No. Teeth | dp (in) | de (in) | dm (in) | Bore +0.001 -0.002 | F (in) | Lm (in) | A (in) | A+V (ins) | S |
| PBMDP16/16 | 16 | 16 | 1 | 1.09 | 0.750 | 0.375 | 0.236 | 0.437 | 0.75 | 1.063 | 0 |
| PBMDP16/32 | 16 | 32 | 2 | 2.088 | 1.250 | 0.5 | 0.4 | 0.375 | 0.875 | 1.562 | 0 |
| PBMDP24/24 | 24 | 24 | 1 | 1.05 | 0.625 | 0.252 | 0.182 | 0.188 | 0.562 | 0.906 | 0 |
| PBMDP24/30 | 24 | 30 | 1.25 | 1.31 | 0.625 | 0.25 | 0.22 | 0.312 | 0.578 | 1.031 | 0 |
| PBMDP24/36 | 24 | 36 | 1.5 | 1.56 | 0.687 | 0.312 | 0.205 | 0.312 | 0.609 | 1.187 | 0 |
| PBMDP32/16 | 32 | 16 | 0.5 | 0.550 | 0.406 | 0.187 | 0.114 | 0.187 | 0.344 | 0.5 | 0 |
| PBMDP32/24 | 32 | 24 | 0.75 | 0.8 | 0.500 | 0.187 | 0.11 | 0.187 | 0.406 | 0.687 | 0 |
| PBMDP48/15* | 48 | 15 | 0.313 | 0.35 | 0.250 | 0.125 | 0.088 | 0.125 | 0.219 | 0.312 | 0 |
| PBMDP48/18 | 48 | 18 | 0.375 | 0.404 | 0.328 | 0.125 | 0.082 | 0.187 | 0.281 | 0.406 | 0 |
| PBMDP48/24 | 48 | 24 | 0.5 | 0.529 | 0.375 | 0.187 | 0.118 | 0.25 | 0.375 | 0.531 | 0 |
Mitre Gears are without any front recess
*PBMDP48/15* = Acetal, all other parts = Nylon
| Imperial Mitre Gear Sets 32, 24 & 16 DP in Brass to spec. CZ121 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Code | DP | No. Teeth | dp (in) | de (in) | dm (in) | Bore (in) | F (in) | Lm (in) | A (in) | V+A(in) | S |
| BBMDP16/16* | 16 | 16 | 1 | 1.088 | 0.78 | 0.312 | 0.233 | 0.455 | 0.756 | 1.064 | 0 |
| BBMDP24/24* | 24 | 24 | 1 | 1.058 | 0.78 | 0.375 | 0.25 | 0.307 | 0.6 | 0.906 | 0 |
| BBMDP32/32* | 32 | 32 | 1 | 1.044 | 0.75 | 0.25 | 0.25 | 0.265 | 0.565 | 0.875 | 0 |
- Cut to the Gleason System
- Bore tolerance H8
Please note: Mitre Gears are without any front recess * Supplied with 1 x G/S hole through boss. M3 on 32DP gears, M4 on Brass 16 & 24 DP gears.
All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.
For special or reworked gears please contact our Manufacturing Department for a quotation.