21 Tooth HTD5 Pulley (21-5M-25F)

Please Choose:

Select bore size required, all bores are to H7 standard shaft fit.



Position of grub screws will be in hub as standard.



Standard JS9 tolerance (some bore/keyway combos not possible)



Qty:

21 Tooth HTD5 Pulley (21-5M-25F)

Starting at: £8.10 Inc VAT
£6.75 Ex VAT

 HTD5M-25 Timing Pulleys
5mm Pitch to suit 25mm wide belt
Centre drilled or Pilot Bore

in Steel or Aluminium with Zinc plated Steel Flanges

 

Mat'l Part Number No. Teeth Type Dp De Df Dm F L Bore No. Flanges
St. P12-5M-25F 12 1F 19.10 17.96 23 13 30.5 36 - P
St. P14-5M-25F 14 1F 22.28 21.14 25 13 30.5 36 6 2
St. P15-5M-25F 15 1F 23.87 22.73 28 16 30.5 36 6 2
St. P16-5M-25F 16 1F 25.46 24.32 28 16.5 30.5 36 6 2
St. P18-5M-25F 18 1F 28.65 27.51 32 20 30.5 36 6 2
St. P20-5M-25F 20 1F 31.83 30.69 36 23 30.5 36 6 2
St. P21-5M-25F 21 1F 33.42 32.28 38 24 30.5 38 6 2
St. P22-5M-25F 22 1F 35.01 33.87 39 25.5 30.5 38 6 2
St. P24-5M-25F 24 1F 38.20 37.06 42 27 30.5 38 6 2
St. P26-5M-25F 26 1F 41.38 40.24 44 30 30.5 38 6 2
St. P28-5M-25F 28 1F 44.56 43.42 48 30.5 30.5 38 6 2
St. P30-5M-25F 30 1F 47.75 46.60 51 35 30.5 38 6 2
St. P32-5M-25F 32 1F 50.93 49.79 54 38 30.5 38 8 2
St. P36-5M-25F 36 1F 57.30 56.16 60 38 30.5 38 8 2
St. P40-5M-25F 40 1F 63.66 62.52 71 38 30.5 38 8 2
Alu. P44-5M-25 44 8 70.03 68.89 - 38 30.5 40 8 -
Alu. P48-5M-25 48 3 76.39 75.25 - 38 30.5 40 8 -
Alu. P60-5M-25 60 3 95.49 94.35 - 50 30.5 40 8 -
Alu. P72-5M-25 72 3 114.59 113.45 - 50 30.5 40 8 -

Please note : All dimensions subject to change.

Customers who bought this product also purchased...

18 Tooth HTD5 Pulley (18-5M-15F)
£5.78 Inc VAT
£4.82 Ex VAT
5mm HTD® Timing Belts
Configure for price
1610 Taperlock Bushes
£4.73 Inc VAT
£3.94 Ex VAT
44 Tooth HTD5 Pulley (44-5M-15)
£15.02 Inc VAT
£12.52 Ex VAT
HTD5 Open Length Rubber Belting
Configure for price
HTD5 Clamp Plate to suit 25mm Width Belt
£16.32 Inc VAT
£13.60 Ex VAT
Footer Banner
Copyright © 2007-2022 www.beltingonline.com
Footer CC Banner