Shaft Collar Double Split
Zinc Plated 2.25″ Double Split Collar
Variation Not Available
WHCADBI2.25Z
In Stock
£
22.48
Inc VAT
£
18.73
Ex VAT
Zinc Plated 2.25" Double Split Collar | WHCADBI2.25Z
Add to List
Remove from List
Add to Cart
SPECIFICATION
FURTHER INFO
Imperial Bore Double Split Shaft Collars Zinc Plated
| Tolerances (inch) | |
|---|---|
| Diameter A (0.250″ – 1.125″) | + 0.003″ / 0 |
| Diameter A (1.250″-2.750″) | + 0.005″ / 0 |
| Diameter A (3.000″ above) | + 0.007″ / 0 |
| Diameter B | + 0.008″ / – 0.008″ |
| Length C | + 0.008″ / – 0.008″ |
- Industry standard
- Interchangeable
- Common type
- Anti-corrosion finish
| Type CADBI in Steel AISI/SAE 1018 Zinc plated Supplied with clamp bolt | ||||
|---|---|---|---|---|
| Stock No | Bore A (inches) | Diameter B (inches) | Width C (inches) | Clamp Bolts |
| WHCADBI0.25Z | 0.25 | 0.625 | 0.281 | 4-40 UNC |
| WHCADBI0.37Z | 0.375 | 0.875 | 0.343 | 6-32 UNC |
| WHCADBI0.5Z | 0.5 | 1.125 | 0.406 | 8-32 UNC |
| WHCADBI0.62Z | 0.625 | 1.312 | 0.437 | 10-32 UNF |
| WHCADBI0.75Z | 0.75 | 1.5 | 0.5 | 1/4-28 UNF |
| WHCADBI0.87Z | 0.875 | 1.625 | 0.5 | 1/4-28 UNF |
| WHCADBI1.0Z | 1 | 1.75 | 0.5 | 1/4-28 UNF |
| WHCADBI1.12Z | 1.125 | 1.875 | 0.5 | 1/4-28 UNF |
| WHCADBI1.25Z | 1.25 | 2.062 | 0.5 | 1/4-28 UNF |
| WHCADBI1.37Z | 1.375 | 2.25 | 0.563 | 1/4-28 UNF |
| WHCADBI1.5Z | 1.5 | 2.375 | 0.563 | 1/4-28 UNF |
| WHCADBI1.62Z | 1.625 | 2.625 | 0.688 | 5/16-24 UNF |
| WHCADBI1.75Z | 1.75 | 2.75 | 0.688 | 5/16-24 UNF |
| WHCADBI1.87Z | 1.875 | 2.875 | 0.688 | 5/16-24 UNF |
| WHCADBI2.0Z | 2 | 3” | 0.688 | 5/16-24 UNF |
| WHCADBI2.25Z | 2.25 | 3.25 | 0.75 | 5/16-24 UNF |
| WHCADBI2.5Z | 2.5 | 3.75 | 0.875 | 3/8- 24 UNF |
| WHCADBI2.75Z | 2.75 | 4 | 0.875 | 3/8- 24 UNF |
| WHCADBI3.0Z | 3 | 4.25 | 0.875 | 3/8- 24 UNF |