Conti Synchroflex
CUSTOM
T5/295 Synchroflex Belt
£
0
Inc VAT
£
0
Ex VAT
Please note, that when specifying a custom belt width, the price shown for ALL widths (including standard industry widths) will always be inclusive of additional cutting and handling charges. For standard industry width belts (shown in the table below) please choose from the 'Related products' at the bottom of this page.
Reset Details
Calculate Price
Add to List
Remove from List
Add to Cart
SPECIFICATION
FURTHER INFO
T5 & T5-DL Standard CONTI SYNCHROFLEX®
Polyurethane, steel reinforced, cast truly endless, standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform.
CONTI SYNCHROFLEX® timing belt T5/T5 -DL
Standard T profile to DIN 7721 with metric pitch and trapezoidal toothform. The technical data refer to standard polyurethane and standard steel cord tension members.
Available versions:
- Single-sided
- With E tension member for increased flexibility
- With Aramid tension member
- Polyurethane special materials upon request
- Antistatic, coloured, mechanical reworked
- Special polyurethanes upon request
- Antistatic, coloured, machined, ground and punched belts
- Backings
Technical Specification
| T5 – Allowable tensile load by belt width | ||||||
|---|---|---|---|---|---|---|
| Belt width | Belt width | 6 | 10 | 16 | 25 | 50 |
| Tension member loadings | Fadm(N) | 180 | 330 | 570 | 930 | 1920 |
| Belt weight | kg/m | 0.017 | 0.027 | 0.043 | 0.068 | 0.135 |
| Standard lengths (mm)/Number of teeth | |||||
|---|---|---|---|---|---|
| Length | No. teeth | Length | No. teeth | Length | No. teeth |
| 100 | 20 | 480 | 96 | 780 | 156 |
| 150 | 30 | 500 | 100 | 800 | 160 |
| 150DL | 30 | 500 FN10 | 100 | 800 FN2 | 160 |
| 165 | 33 | 505 | 101 | 815 | 163 |
| 180 | 36 | 510 | 102 | 815DL | 163 |
| 185 | 37 | 510 FN1 | 102 | 840 | 168 |
| 200 | 40 | 515DL | 103 | 840 FN84 | 168 |
| 210 | 42 | 525 | 105 | 860 FN1 | 168 |
| 215 | 43 | 525 FA | 105 | 860DL | 172 |
| 220 | 43 | 525DL | 105 | 900 | 180 |
| 225 | 45 | 545 | 109 | 920 | 184 |
| 225 FN90 | 45 | 550 | 110 | 925 | 185 |
| 245 | 49 | 560 | 112 | 925 FN1 | 185 |
| 250 | 50 | 575 | 115 | 940 | 188 |
| 255 | 51 | 590 | 118 | 940DL | 188 |
| 260 | 52 | 590DL | 118 | 990 | 198 |
| 260DL | 52 | 600 FN24 | 120 | 990 FA | 198 |
| 270 | 54 | 610 | 122 | 990 FN4 | 198 |
| 280 | 56 | 615 FN24 | 123 | 1075 | 215 |
| 295 | 59 | 620 | 124 | 1075 FA | 215 |
| 300DL | 60 | 620DL | 124 | 1100 | 220 |
| 305 | 61 | 625DL | 125 | 1100DL | 220 |
| 330 | 66 | 630 | 126 | 1160 | 232 |
| 330DL | 66 | 630 FA | 126 | 1160 FA | 232 |
| 340 | 68 | 650 | 130 | 1215 | 243 |
| 355 | 71 | 650 FA | 130 | 1215 FN1 | 243 |
| 365 | 73 | 660 | 132 | 1215 FN54 | 243 |
| 390 | 78 | 660 FN30 | 132 | 1315 | 263 |
| 390 FN1 | 78 | 690 | 138 | 1315 FA | 263 |
| 400 | 80 | 690 FA | 138 | 1325DL | 265 |
| 410 | 82 | 690 FN3 | 138 | 1350 FN1 | 270 |
| 410DL | 82 | 700 | 140 | 1380 | 276 |
| 420 | 84 | 720 | 144 | 1380 FN1 | 276 |
| 455 | 91 | 725 | 145 | 1440 FA | 276 |
| 460 | 92 | 750 | 150 | 1500 | 300 |
| 460 FN4 | 92 | 750DL | 150 | 1500 FA | 300 |
| 460DL | 92 | 765 | 153 | 1525 FN1 | 305 |
- Preferred belt width in (mm) 6, 10, 16, 25, 32, 50. Other dimensions upon request.
- DL double-sided
- FA with bigger back thickness
- FN with profiles on the back of the belt
Drive Type A
| Type A | T5 |  |
|---|---|---|
| Zmin | 10 | |
| dmin | 30 |
Drive Type B
| Type B | T5 |  |
|---|---|---|
| Zmin | 15 | |
| dmin | 30 |
Zmin = Minimum number of teeth.
dmin= Minimum diameter (mm)