AT10 and ATL10 BRECO® Open Length (M) Joined (V)

Polyurethane, steel reinforced, extruded open length & joined – High Power AT Profile in metric pitch with trapezoidal tooth form.

x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request

AT 10- Allowable tensile load
Belt width	b (mm)	25	32	50	75	100	150
Tension member loadings Fadm(N)	M	4250	5500	8500	12750	17000	22000
	V	2125	2750	4250	6375	8500	11000
Belt weight	kg/m	0.158	0.186	0.290	0.436	0.581	0.839

Drive Type A

Type A	AT10	AT10-T	ATL10-DR
Zmin	15	25	25
dmin	50	80	80

Z_min = Minimum number of teeth.
d_min= Minimum diameter (mm)

ATL10 Belt widths (mm) Intermediate belt widths on request
32	50	75	100	150

ATL10 (M/V)	Available lengths and versions
Standard delivery lengths (M)	roll of 50 or 100m
Cut to lengths/lengths > 100m	On request
Minimum length joined (V)	–
Standard material	TPUST11)
Steel tension member	x
E tension member	–
Stainless Steel or Aramid member	o
PAZ	x
PAR	–
PAZ-PAR	–
DL/DL-PAZ	–
DR/DR-PAZ	–
T/T- PAZ	–

Belt width	b (mm)	32	50	75	100	150
Tension member loadings Fadm(N)	M	7200	11200	16800	22400	36000
Belt weight	kg/m	0.220	0.340	0.510	0.680	1.020

Drive Type B

Type B	AT10	AT10-T	ATL10
Zmin	25	25	25
dmin	120	120	150