Conti Synchroflex
CUSTOM
AT5/710 Synchroflex Belt
£
0
Inc VAT
£
0
Ex VAT
Please note, that when specifying a custom belt width, the price shown for ALL widths (including standard industry widths) will always be inclusive of additional cutting and handling charges. For standard industry width belts (shown in the table below) please choose from the 'Related products' at the bottom of this page.
Reset Details
Calculate Price
Add to List
Remove from List
Add to Cart
SPECIFICATION
FURTHER INFO
AT5 Standard & GEN III SYNCHROFLEX®
Polyurethane, Steel reinforced, cast truly endless – High Power AT Profile in metric pitch with trapezoidal tooth form.
CONTI SYNCHROFLEX® timing belt AT5
Available version:
- Single-sided
- With E tension member for better flexibility
- With reinforced design upon request
- With Aramid tension member upon request
- Polyurethane special materials upon request
- Antistatic, coloured, mechanical reworked
CONTI SYNCHROFLEX® timing belt AT5 GEN III
Standard version:
- Single-sided red
- High performance composite PU
- Steel cord tension members with high density two filament construction
- 25% more power than standard AT
| Standard stock lengths (mm)/Number of teeth | |||
|---|---|---|---|
| Length | No. teeth | Length | No. teeth |
| 195 | 39 | 630 | 126 |
| 225 | 45 | 660 | 132 |
| 255 | 51 | 670 | 134 |
| 260 | 52 | 690 | 138 |
| 280 | 56 | 710 | 142 |
| 300 | 60 | 720 | 144 |
| 330 | 66 | 750 | 150 |
| 340 | 68 | 780 | 156 |
| 375 | 75 | 825 | 165 |
| 390 | 78 | 860 | 172 |
| 420 | 84 | 875 | 175 |
| 450 | 90 | 900 | 180 |
| 455 | 91 | 920 | 184 |
| 480 | 96 | 975 | 195 |
| 490 | 98 | 1050 | 210 |
| 500 | 100 | 1125 | 225 |
| 525 | 105 | 1230 | 246 |
| 545 | 109 | 1500 | 300 |
| 545 FA | 109 | 1750 | 350 |
| 600 | 120 | 2000 | 400 |
| 610 | 122 | 3800 FA | 760 |
| 620 | 124 | ||
- Preferred belt width in mm: 6, 10, 16, 25, 32, 50, 75, 100. Other dimensions on request.
- FA with bigger back thickness
- FN with profiles on the back of the belt
Technical Specification
| Standard (belt widths) | b (mm) | 6 | 10 | 16 | 25 | 32 | 50 | 75 | 100 |
|---|---|---|---|---|---|---|---|---|---|
| Tension member loadings | Fadm(N) | 350 | 700 | 1260 | 2030 | 2660 | 4200 | 6370 | 8610 |
| Belt weight | kg/m | 0,020 | 0,034 | 0,054 | 0,085 | 0,109 | 0,170 | 0,255 | 0,340 |
| GEN III (belt widths) | b (mm) | 6 | 10 | 16 | 25 | 32 | 50 | 75 | 100 |
|---|---|---|---|---|---|---|---|---|---|
| Tension member loadings | Fadm(N) | 417 | 787 | 1342 | 2175 | 2823 | 4489 | 6803 | 9117 |
| Belt weight | kg/m | 0,022 | 0,036 | 0,058 | 0,090 | 0,115 | 0,180 | 0,270 | 0,360 |
Drive Type A
| Type A | AT5 | GEN III |  |
|---|---|---|---|
| Zmin | 15 | 15 | |
| dmin | 25 | 25 |
Drive Type B
| Type B | AT5 | GEN III |  |
|---|---|---|---|
| Zmin | 20 | 20 | |
| dmin | 60 | 60 | |
Zmin = Minimum number of teeth.
dmin= Minimum diameter (mm)