T10DL Double Sided Brecoflex® Timing Belts

Manufactured by: Breco®

T10DL

(Double-Sided)
Polyurethane, steel reinforced, extruded endless
Standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform

Delivery on Brecoflex Belts is typically 3-4 weeks

Important Notes:
These belts are made to order and as such are non returnable

Selecting Tension Members such as 'Kevlar' or 'Stainless Steel' may mean there are minimum order requirements

Selecting Materials such as 'Kevlar 385 Clear PU' or 'FDA Food Grade PU' may mean there are minimum order requirements

Type	Length	No. Teeth
T10DL/1080	1080	108
T10DL/1150	1150	115
T10DL/1210	1210	121
T10DL/1240	1240	124
T10DL/1250	1250	125
T10DL/1320	1320	132
T10DL/1350	1350	135
T10DL/1390	1390	139
T10DL/1400	1400	140
T10DL/1420	1420	142
T10DL/1460	1460	146
T10DL/1500	1500	150
T10DL/1560	1560	156
T10DL/1610	1610	161
T10DL/1750	1750	175
T10DL/1780	1780	178
T10DL/1880	1880	188
T10DL/1960	1960	196
T10DL/2250	2250	225
T10DL/2360	2360	236
T10DL/2500	2500	250

Type	Length	No. Teeth
T10DL/2650	2650	265
T10DL/2800	2800	280
T10DL/3000	3000	300
T10DL/3100	3100	310
T10DL/3150	3150	315
T10DL/3350	3350	335
T10DL/3750	3750	375
T10DL/4000	4000	400
T10DL/4250	4250	425
T10DL/4500	4500	450
T10DL/4750	4750	475
T10DL/5000	5000	500
T10DL/5300	5300	530
T10DL/5600	5600	560
T10DL/6000	6000	600
T10DL/6300	6300	630
T10DL/6700	6700	670
T10DL/7100	7100	710
T10DL/7500	7500	750
T10DL/8000	8000	800
T10DL/9000	9000	900

Non-standard width & length
please enquire

T10DL

Available endless lengths for T10DL

for preferred lengths refer to table
belts under 1080mm with PAZ nylon tooth facing
under 1080mm further lengths upon request
over 1080mm belts lengths available in multiples of 1 tooth

Type	T10	T10-E	T10-DL-E	T10-DL	T10-DR	T10-T
z_min =	12	10	15	20	20*	20*
d_min =	60	50	50	60	60	60
Type	T10	T10-E	T10-DL-E	T10-DL	T10-DR	T10-T
z_min =	20	15	15	20	20	20
d_min =	60	50	50	60	80	80