AT10DR 2mm Thicker Brecoflex® Timing Belts

Manufactured by: Breco®

AT10DR

(2mm Thicker Back)
Polyurethane, steel reinforced, extruded endless
High Power AT Profile in metric pitch with trapezoidal toothform

Delivery on Brecoflex Belts is typically 3-4 weeks

Important Notes:
These belts are made to order and as such are non returnable

Selecting Tension Members such as 'Kevlar' or 'Stainless Steel' may mean there are minimum order requirements

Selecting Materials such as 'Kevlar 385 Clear PU' or 'FDA Food Grade PU' may mean there are minimum order requirements

Type	Length	No. Teeth
AT10DR/1150	1150	115
AT10DR/1210	1210	121
AT10DR/1240	1240	124
AT10DR/1250	1250	125
AT10DR/1320	1320	132
AT10DR/1400	1400	140
AT10DR/1420	1420	142
AT10DR/1500	1500	150
AT10DR/1530	1530	153
AT10DR/1600	1600	160
AT10DR/1700	1700	170
AT10DR/1800	1800	180
AT10DR/1900	1900	190
AT10DR/2000	2000	200
AT10DR/2120	2120	212
AT10DR/2240	2240	224
AT10DR/2360	2360	236
AT10DR/2500	2500	250
AT10DR/2650	2650	265
AT10DR/2800	2800	280
AT10DR/3000	3000	300

Type	Length	No. Teeth
AT10DR/3150	3150	315
AT10DR/3350	3350	335
AT10DR/3550	3550	355
AT10DR/3750	3750	375
AT10DR/4000	4000	400
AT10DR/4250	4250	425
AT10DR/4500	4500	450
AT10DR/4750	4750	475
AT10DR/5000	5000	500
AT10DR/5300	5300	530
AT10DR/5600	5600	560
AT10DR/6000	6000	600
AT10DR/6300	6300	630
AT10DR/6700	6700	670
AT10DR/7100	7100	710
AT10DR/7500	7500	750
AT10DR/8000	8000	800
AT10DR/9000	9000	900

Non-standard width & length
please enquire

AT10DR

Available endless lengths for AT10DR

for preferred lengths refer to table
belts under 1080mm with PAZ nylon tooth facing
under 1080mm further lengths upon request
over 1080mm belts lengths available in multiples of 1 tooth
none standard width please enquire

Type	AT10	AT10-DL	AT10-DR	AT10-T	AT10-E
z_min	15	25	25	25	12
d_min	50	80	80	80	50
Type	AT10	AT10-DL	AT10-DR	AT10-T	AT10-E
z_min	25	25	25	25	20
d_min	120	120	120	120	80

Not Sure about all the different types?
Click on the links

Standard	DL	DR	T
PAZ	DL-PAZ	DR-PAZ	T-PAZ
PAR
PAZ-PAR

Tension member loadings
allowable tensile load by belt width

Belt width	b [mm]	25	32	50	75	100	150
Tension member loadings	F_tadm [N]	3500	4750	7750	12000	16000	24500
Belt weight [kg/m]	AT10	0.158	0.202	0.316	0,473	0,630	0.839
	AT10-DL	0.184	0.233	0.375	0.566	0.755	-
	AT10-DR	0.213	0.275	0.433	0.653	0.871	-