My shopping cart
Item(s) 0 | Total: £0.00








Select bore size required, all bores are to H7 standard shaft fit.



Position of grub screws will be in hub as standard.



Standard JS9 tolerance



For Imperial or Non standard sizes: round up, select nearest metric equivalent and state actual required size in field above ( i.e. for 1/4" select 7mm).



Please Note: If you select multiple items, longest lead-time will prevail.

Qty: 



  

18 Tooth HTD5 Pulley (18-5M-15F)


Starting at: £4.41


 HTD5M-15 Timing Pulleys
5mm Pitch to suit 15mm wide belt
Centre drilled or Pilot Bore

in Steel or Aluminium with Zinc plated Steel Flanges

 

Mat'l Part Numbers No. Teeth Type Dp De Df Dm F L Bore No. Flanges
St. P12-5M-15F 12 1F 19.10 17.96 23 13 20.5 26 - 2
St. P14-5M-15F 14 1F 22.28 21.14 25 13 20.5 26 6 2
St. P15-5M-15F 15 1F 23.87 22.73 28 16 20.5 26 6 2
St. P16-5M-15F 16 1F 25.46 24.32 28 16.5 20.5 26 6 2
St. P18-5M-15F 18 1F 28.65 27.51 32 20 20.5 26 6 2
St. P20-5M-15F 20 1F 31.83 30.69 36 23 20.5 26 6 2
St. P21-5M-15F 21 1F 33.42 32.28 38 24 20.5 26 6 2
St. P22-5M-15F 22 1F 35.01 33.87 39 25.5 20.5 26 6 2
St. P24-5M-15F 24 1F 38.20 37.06 42 27 20.5 28 6 2
St. P26-5M-15F 26 1F 41.38 40.24 44 30 20.5 28 6 2
St. P28-5M-15F 28 1F 44.56 43.42 48 30.5 20.5 28 6 2
St. P30-5M-15F 30 1F 47.75 46.60 51 35 20.5 28 6 2
St. P32-5M-15F 32 1F 50.93 49.79 54 38 20.5 28 8 2
St. P36-5M-15F 36 1F 57.30 56.16 60 38 20.5 28 8 2
St. P40-5M-15F 40 1F 63.66 62.52 71 38 20.5 28 8 2
Alu. P44-5M-15 44 3 70.03 68.89 - 38 20.5 30 8 -
Alu. P48-5M-15 48 3 76.39 75.25 - 38 20.5 30 8 -
Alu. P60-5M-15 60 3 95.49 94.35 - 50 20.5 30 8 -
Alu. P72-5M-15 72 3 114.59 113.45 - 50 20.5 30 8 -

Please note : All dimensions subject to change.






footer_01
footer_02
footer_03

Copyright © 2007-2018 www.beltingonline.com