SPAX (Moulded Cog)

Step 3

How to calculate the correct belt length?

Enter value and click on calculate. Result will be displayed.

Enter your values in millimeters:

Pulley Centre Distance:
Diameter Of Large Pulley:
Diameter Of Other Pulley:
 

Results:

Length Of V-Belt :

Final Steps

  1. Note the belt length as you may need to round up or down to the closest standard size in our product listings. The rounding is dependent on how much tension adjustment you have, but should not normally exceed 15mm
    Important Note: Whether you can rounding up or down is dependent on the adjustment point when you measured the Centre Distance.
    Example:
    Belt length 844.53 mm rounded up =
    850 mm Belt Length. (If adjustment allows)

     
  2. All that is needed now is to put the section in front of the size and you have the correct type.
    Example:
    SPAX Belt Section + 850 inch belt length =
    SPAX850

    Click Here for SPAX section V-Belts


There are no products to list in this category.
Footer Banner
Copyright © 2007-2024 www.beltingonline.com
Footer CC Banner